Posts Tagged ‘panel’
Outlets and Electricians in Frisco
A customer in Frisco bought a freezer to keep in the garage. The Frisco resident plugged the freezer into the closet outlet / plug but the but the freezer tripped the breaker in the electrical panel. The Frisco home owner unpluged the freezer and reset the breaker in the electrical panel / breaker box. When he plugged the freezer in a second time it tripped the breaker again. Once again he reset the breaker in the breaker box / electrical panel.
He called and wanted us to come over the next time we were working in Frisco close to his house. When the electrician showed up to evaluate the problem he found that the freezer was over loading the electrical circuit. He recommended that the freezer be on it’s own electrical circuit. The home owner agreed. The electrician was able to run the electrical wire across the attic and down the wall to the location that the customer preferred. Now the customer can plug the freezer in with out tripping the breaker.
If you have a need for an electrical outlet / plug, or have a problem with electrical breakers tripping, give us a call. We can get that new plug / outlet install in no time at all. We service Plano, Frisco, Little Elm and all surrounding areas. Call now
Lights & plugs not working in Frisco
We got a call from a current customer in Frisco because she has some outlets and light fixtures go out. She tried many different plugs through out the living room, but non were working. The light fixtures in the living room were not working either. The Fisco customer also checked her breaker box in the garage and none of the breaker had tripped.
When the electrician he checked the plugs and light fixtures in the dinning room, and the breaker in the electrical panel in the garage. He found that a breaker that controled all the outlets and light fixtures in the living room had tripped. The handle for the brekaer did not go all the way over so the customer that it was still working. After the electrician reset the breaker and pushed it to the on position all the plugs and light fixtures in the living room started working fine.
If you have a problem with light fixtures or plugs / outlets not working give us a call and we can get the problem fixed for you. We are licensed and insured. We serice Plano, Frisco, Little Elm and all surrounding areas. Call today – 469-261-1503
Electrician in Plano TX – Outlets not working
A new customer in Plano called today because she had lost power to multiple outlets in her dinning room and kitchen area when she unpluged a lamp to move it to a new location. The Plano resident said that she did not notice that the plugs were not working at first, but when she tried to plug in the toaster in the kitchen the outlet was dead. She tried pluging the toaster into a different outlet in the kitchen but got the same result.
She was very happy that we were able to get to her Plano house very quickly. Once the electrician was there she explained what had happened. The electrician then proceded to investigate what the problem could be. He first checked all the breakers in the breaker box. All the breakers in the electrical panel were working fine. In the “on” position and holding with out problem. Then the electrician started checking the outlets that had no power. The electrician then found a plug that had a wire that had become loose and seprated itself from the outlet. Once the wire was reattached all the rest of the plug worked fine.
If you have a problem with outlets not working give a call and we can get the problem taken care of for you. Correctly and safely. No problem is too big or small. Call today – 469-261-1503. We service Plano, Frisco, Little Elm and all surrounding areas. Call Today.
Electrical Panel Replacement in Dallas
We got a call recently from an existing customer in Dallas because she was having problems with her breakers tripping. Periodically her electrical breakers would trip at miscellaneous times duringthe day. She would reset the breakers in the electrical panel and some times the breakers would hold for a little while and other times she would have to try to reset the breaker several times before she could get the breaker to hold. Todd went to her house to take a look at the breakers tripping. Todd found that the inner components of the electrical panel had worn down and no longer held the electrical breakers in place safely. This is why the electrical breakers kept tripping. Once Todd installed a new electrical panel with all new breakers she had no more problems with tripping breakers.
If you are having a problems with your electrical breakers tripping this could be due to many different reasons. 1) The item plugged into the outlet could be defective. 2) The breaker in the electrical panel could be weak. 3) The component in the electrical panel holding the breaker could be defective and not properly holding the breaker safely. 4) There is a problem with the wiring some where. Keep in mind that this is not always the case and you should call a licensed electrician to evaluate your specific circumstances. Remember theses are just some of the reasons that a electrical breaker would trip . This problem could be fixed in no time at all and your home could be saved from greater damage in the future. Call now for your free estimate – 469-261-1503
Plano Breaker box inspection
An existing customer in Plano, TX called us out to take a look at her electrical panel. After an inspection of the electrical panel it was decided by the customer that a new electrical panel should be installed. So we installed a new 200 amp outdoor panel with main breaker, new meter base, new ground rod, and surge suppressor breaker.
Panel fillers installed in Little Elm, TX
We installed some panel fillers in the open slots in the electrical panel at a customers place in Little Elm, TX
Electrical panel replaced in Dallas.
We were called out to a customers house in Dallas, TX to inspect her electrical panel because she was having various breakers trip. She would reset the breakers and they would stay on for a while, but then trip again. When Todd inspected the electrical panel he found that the electrical panel was old and falling apart. The breakers were worn out and not wanting to stay in the on position. We replaced her electrical panel and also installed a new ground rod and a cold water bond. Now everything works fine.
Replace electrical panel in Dallas, TX
A lady in Dallas, TX called us out to inspect her electrical panel. She kept loosing power to the stove and other parts of her house. After inspecting the electrical panel we determened that the panel should replace. So after pulling the proper permits with the City of Dallas and cordnating the temperary disconnect and reconnect with the utility company we installed a new 200 amp electrical panel, a new meter base, new ground rod, and a cold water bond. While we were there she also had us install a new dedicated plug/outlet for the computer and a surge suppressor.
Installed Power-Saver in Celina, TX
In Celina, TX a customer of ours wanted a Power-Saver unit installed next to their electrical panel / breaker box. The also wanted another GFI outlet / plug installed.
Power-Saver 1200 installed in Oak Point, TX
An existing customer in Oak Point, TX called us to have a new Power-Saver 1200 unit installed next to her electrical panel / breaker box to help save money on her electric bill. She is excited that it will help propect her home against power surges and save money on her electric bill.